Atnaujinkite slapukų nuostatas

El. knyga: Green and Intelligent Technologies for Sustainable and Smart Asphalt Pavements: Proceedings of the 5th International Symposium on Frontiers of Road and Airport Engineering, 12-14 July, 2021, Delft, Netherlands (IFRAE) [Taylor & Francis e-book]

Edited by (Department of Road and Traffic Engineering, Tongji University, Shanghai, P.R. China), Edited by (Delft Uni of Tech, the Netherlands.), Edited by (Delft Uni of Tech, the Netherlands.), Edited by (Tongii University, College of), Edited by (Delft Uni of Tech, the Netherlands.)
  • Formatas: 790 pages
  • Išleidimo metai: 20-Dec-2021
  • Leidėjas: CRC Press
  • ISBN-13: 9781003251125
  • Taylor & Francis e-book
  • Kaina: 341,60 €*
  • * this price gives unlimited concurrent access for unlimited time
  • Standartinė kaina: 487,99 €
  • Sutaupote 30%
  • Formatas: 790 pages
  • Išleidimo metai: 20-Dec-2021
  • Leidėjas: CRC Press
  • ISBN-13: 9781003251125
Green and Intelligent Technologies for Sustainable and Smart Asphalt Pavements contains 124 papers from 14 different countries which were presented at the 5th International Symposium on Frontiers of Road and Airport Engineering (IFRAE 2021, Delft, the Netherlands, 12-14 July 2021). The contributions focus on research in the areas of "Circular, Sustainable and Smart Airport and Highway Pavement" and collects the state-of-the-art and state-of-practice areas of long-life and circular materials for sustainable, cost-effective smart airport and highway pavement design and construction. The main areas covered by the book include:

Green and sustainable pavement materials

Recycling technology

Warm & cold mix asphalt materials

Functional pavement design

Self-healing pavement materials

Eco-efciency pavement materials

Pavement preservation, maintenance and rehabilitation

Smart pavement materials and structures

Safety technology for smart roads

Pavement monitoring and big data analysis

Role of transportation engineering in future pavements

Green and Intelligent Technologies for Sustainable and Smart Asphalt Pavements aims at researchers, practitioners, and administrators interested in new materials and innovative technologies for achieving sustainable and renewable pavement materials and design methods, and for those involved or working in the broader eld of pavement engineering.
Preface xv
Conference chairs xvii
Standing international advisory committee xxi
Scientific committee xxiii
Young committee xxv
Organizing committee xxvii
Green and sustainable pavement materials
Shifeng Wang
Shanghai Jiao
Feipeng Xiao
Mix design of base course of high ratio content iron tailings sand recycled mixture
3(4)
Y.S. Dong
H. Zhang
Y. Hou
J.L. Tian
Evaluation of asphalt binder anti-aging performance based on rheological and chemical properties
7(7)
M. Guo
M. C. Liang
H. Q. Liu
Y. Fu
Utilisation of recycled concrete aggregate in bituminous paving mixes: An economic evaluation
14(6)
J. P. Giri
M. Panda
U.C. Sahoo
Simple evaluation of NOx degradation by Nano-Ti02 coatings on road pavements under natural light
20(6)
M. Fang
Y. Cheng
L. Zhan
Application of green calcium sulphoaluminate cement to prepare foamed concrete for road embankment
26(6)
H. Q. Yuan
Z. Ge
R.J. Sun
Y.H. Guan
Y.Q. Huo
H.Z. Zhang
Properties and applicability of pervious concrete for paving flags
32(6)
I. N. Grubesa
I. Barisic
B. Bacun
S. Juradin
Research on shrinkage control technology of lightweight ultra-high performance concrete
38(6)
J. Fu
Z.S. Wang
Y.B. Min
Q.J. Ding
Asphalt modified by finely dispersed sidewall tire rubber with excellent low temperature performance
44(6)
X. Yu
Y. Xie
S. Wang
H. Yao
Fe-doped Ti02 loaded on activated carbon for degrading vehicle exhaust in asphalt pavement
50(7)
Z. Hu
T. Xu
P. Liu
M. Oeser
Effect of three-component polyurethane adhesive on the interlaminar bonding performance of poro-elastic road surface
57(5)
J. Li
M.L. Li
J. Li
H. Wu
W. Y. Ren
Characterization of Asphalt binder using tackiness properties
62(5)
S. N. Suresha
V. Hemanth Kumar
Investigation on the temperature field distribution of porous asphalt mixture with steel slag aggregates heated by microwave
67(7)
Y. Wang
X. Chen
Z. Liu
Q. Dong
Rheological behavior of asphalt binder based on time-temperature superposition principle: A molecular dynamics simulation study
74(11)
X. Zhu
W. Zhang
P. Wu
L. Zhou
C. Yan
Z. Du
Recycling technology
Mingliang Li
Gordon Airey
Effect of Portland Pozzolanic cement filler on waste mixed plastic modified bituminous mix
85(6)
S. Karmakar
T.K. Roy
U. Naveen
The use of gyratory compaction to assess the workability of asphalt mixtures
91(7)
A. Margaritis
T. Tanghe
J. De Visscher
S. Vansteenkiste
A. Vanelstraete
The rheological properties of terminal blend hybrid asphalt before and after aging
98(5)
S. Wang
W. Huang
Vehicle load simulator induced cracking in semi-dense asphalt with RCA filler
103(5)
P. Mikhailenko
M. Arraigada
Z. Piao
L.D. Poulikakos
Method for reducing RAP agglomeration and variability, increasing RAP content: Fine separation
108(7)
H. Zhan
N. Li
W. Tang
Z. Y. Wang
X. Yu
H. Ma
Study on the influence of red mud on the durability of asphalt mixture and its modification
115(8)
J. Zhang
C. Guo
J. Wang
Y. Rong
K. Wang
C. Ma
M. Liang
Z. Yao
Evaluation of low temperature performance of oil modified asphalt using the glass transition temperature
123(6)
J.Q. Xu
C. Xing
B. Hong
D. W. Wang
Z.P. Fan
G. Y. Lu
Resource recycling of the industrial solid waste in induction asphalt mixture
129(4)
C.L. Fu
K. Liu
Q.T. Liu
P.F. Liu
Rheological and chemical characterization on the polymer modified bitumen with different rejuvenators
133(6)
P. Lin
X. Liu
S. Ren
S.M.J.G. Erkens
S. Nahar
The effect of emulsified rejuvenator on the workability of plant RAP mixtures
139(4)
W. Tang
N. Li
H. Zhan
X. Yu
G. Y. Ding
X. Y. Zou
Utilization of RAP for the construction of CTB containing thin bituminous pavement layer and chemical stabilizer
143(5)
R.S. Chhabra
G.D. Ransinchung R.N.
S. Vallabhaneni
K.M. Remella
A. Singh
Equivalence testing of iCCL and BBR Low-Temperature continuous grade
148(7)
H. Azari
A. Mohseni
Rheological and chemical properties of bitumen during hot in-place recycling
155(7)
J. Wang
F. Xiao
Q. Xiang
The influence of long-term aging on the chemical properties of bitumen
162(6)
S. Ren
X. Liu
P. Lin
S.M.J.G. Erkens
S. Nahar
Application of machine learning to determine the influence of particle size distribution on stability of bituminous mixes
168(7)
H. Chakravarty
S. Sinha
Functional pavement design
Zhen Leng
Miomir Miljkovic
Fatigue models for airfield concrete pavement: Review and discussion
175(7)
J. Yuan
W. Li
X. Jia
L. Ma
Z. Zhou
Exploration on overlay tester test analysis for anti-cracking performance of ultra-thin layer mixes
182(6)
J.L. Tian
Y.S. Dong
Y. Hou
X.L. Tong
J.B. He
Asphalt pavement unified mechanical potential damage model for top-down cracks and rutting distress
188(6)
S. Jian
S. Jiangtao
W. He
L. Xiaojun
Research on freeze-thaw fatigue of asphalt mixture based on ADE theory
194(7)
W. Zhan
S. Gao
Y.Q. Yu
D.Q. Xiao
J.C. Wang
Reliability analysis of asphalt mixture and pavement based on MC method
201(7)
Y.Z. Sun
Z. Zheng
L.J. Li
J.C. Wang
Case study: Crack propagation in situ vs. service life prediction
208(5)
A. Blasl
A. Zeifiler
F. Wellner
Study on the influence of coarse aggregate blends of different sizes and proportions on the homogeneity of asphalt mixtures
213(7)
W. Yu
C. Xing
D. Wang
G. Lu
Rutting depth predictive model for airfield composite pavement
220(8)
L. Man
J. Ling
L. Ren
Z. Wang
J. Gao
The benefit of joint heaters for asphalt surface construction
228(6)
G. White
Study on the seasonal variation and deterioration behavior of the skid resistance performance of asphalt pavement
234(7)
Y. He
C. Xing
C. Wang
Q. Tan
B. Hong
D. Wang
Field evaluations of nuclear and non-nuclear gauges as alternates to destructive coring for airport asphalt density testing
241(6)
G. White
F. Alrashidi
Effect of climate region on field oxidative ageing of asphalt pavements using multiphysics modelling approaches
247(6)
E. L. Omairey
Y. Zhang
Passing rate difference analysis on dense and stone matrix gradations of asphalt mixtures
253(7)
Z.F. Zhao
J. Li
X. Xiao
Z.L. Li
F.P. Xiao
Pavement coding method providing high-precision positioning for vehicles
260(6)
L.R. Zhao
H.D. Zhao
D.C. Gao
J. W. Cai
Fatigue behavior and abrasion resistance of prefabricated pavement textures assisted with 3D printing technology
266(9)
W. Sheng
Y. Wang
Warm & cold mix asphalt materials
Yuhong Wang
Evangelos Manthos
Two comprehensive cracking resistance indexes of asphalt mixtures using non-notched semicircular bending tests
275(7)
D. Xu
F. Ni
Z. Zhao
D. Zheng
Investigation on influencing factors of moisture susceptibility of warm mix asphalt based on surface free energy
282(7)
L. Liu
L. Liu
Y. Yu
L. Sun
Viscoelastic finite element modeling of flexible pavement patching
289(6)
Y. Lu
R.M. Hajj
Computer molecular dynamics simulation study on the asphalt molecular model construction based on time-of-flight mass spectrometry
295(6)
K. Hu
C.H. Yu
S. Han
Y.C. Chen
G.X. Chen
Study on blending degree of virgin and aged asphalt in hot recycled mixture based on aggregates surface properties
301(7)
S.H. Chen
X. Cai
L. Chen
K.H. Wu
J. W. Xie
H. Xiao
H.M.Z. Hassan
Laboratory performance assessment of low temperature asphalt mixtures with high recycled materials contents
308(5)
P. Georgiou
A. Loizos
Calculation derivation and test verification of indirect tensile strength of asphalt pavement interlayers at low temperatures
313(7)
Q. Zhang
Z. Fang
Y. Xu
Z. Ma
Use of recycled concrete aggregate in cold bituminous emulsion mix
320(5)
S. Jain
B. Singh
Low-temperature performance test method and improvement measures of emulsified asphalt cold recycling mixture
325(7)
Z. Han
Y. Meng
T. Jin
L. Liu
L. Sun
Moisture susceptibility evaluation of RAP based foamed bituminous mix
332(6)
L. Gupta
R. Kumar
A. Kumar
Effect of foaming water on the rheological properties of foamed asphalt binder and compactability of stabilized RAP in cold recycling
338(6)
W. Ma
D. Wang
R. West
Micro recovery, aging, and performance grading of emulsified asphalt using UPTiM
344(7)
A. Mohseni
H. Azari
Research on diffusion process of new and old asphalt based on SEM
351(7)
X. Tian
X. Lu
H. Hu
C. Guo
G. Li
Low-temperature fracture behaviour of synthetic polymer-fibre reinforced warm mix asphalt
358(5)
C.G. Daniel
X. Liu
P. Apostolidis
S.M.J.G. Erkens
A. Scarpas
Preparation and performance of hydrophobic coating for the tunnel with photocatalytic NO-degrading function
363(10)
G. Liu
H. Xia
Y. Niu
W. Zhang
L. Lang
H. Geng
L. Song
Pavement preservation, maintenance and rehabilitation
Dawei Wang
Zhanping You
Verification of the rigid layer depth setting model based on the consistency of backcalculated subgrade modulus
373(6)
Y. Hu
L. Sun
G. Zang
Study on nonlinear behavior of soil-cement based on CTS model
379(5)
W. Zhan
X. Yan
Z. Hu
Y. Yu
J.C. Wang
A method for prediction and maintenance planning of multi-lane pavement
384(11)
X. Tong
Y. Hou
Y. Dong
Y. Zhang
J. Tian
Study on decay behavior of asphalt pavement skid resistance performance
395(5)
X. Lin
Pavement roughness level classification based on logistic and decision tree machine learnings
400(6)
H. Han
T. Zhang
Q. Dong
X. Chen
Y. Wang
Towards more realistic accelerated laboratory aging of asphalt samples
406(6)
G. White
A. Abouelsaad
Effects of curing time on performances of high-viscosity modified asphalt
412(7)
M. Li
J. Xu
J. Li
H. Wu
H. Lu
Field assessment of rigid pavement stabilization using cementitious grout: Case study
419(7)
H. Zhao
C. Li
L. Ma
Z. Tao
Predicting the pavement performance: A comparison on traditional and multivariate time series model
426(6)
W. Jiang
Q. Dong
T. Zhang
Research on information management of Airport pavement quality based on BIM and GIS integration
432(5)
Z. Liu
X. Gu
L. Wang
Study on comprehensive evaluation of pavement condition based on comprehensive integration weighting method and cloud model
437(8)
M. M. Xiao
L. Fan
Study on the instantaneous healing characteristic of asphalt under cyclic loading
445(4)
L. Zhou
W. Huang
Q. Lv
L. Sun
Preliminary field and laboratory investigation on the use of Non-Contact Digital Ski sensor as pavement-smoothing technology in the South Korea expressway network
449(7)
A. Cannone Falchetto
K.H. Moon
Transport policies in Nigeria: A state of the art review
456(6)
M. Umar Kolo
A. Dayyabu
A. Oluwatosin
S. Vsman Chidawa
Use of non-potable water in pavement construction: A laboratory study using seawater
462(9)
A. Rampersad
G. Mvelase
Smart pavement materials and structures
Xue Luo
Yuqing Zhang
Numerical modelling of fatigue cracking in asphalt mixture using cohesive elements
471(7)
A. Chen
G.D. Airey
N. Thorn
L. Wan
Y. Li
Experimental analysis of piezoelectric transducers applications for energy harvesting pavement
478(6)
H. Zhao
C. Li
L. Ma
K. Peng
Z. Y. Bian
A novel weigh-in-motion system for traffic loads using F-P cavity fiber optical technology
484(7)
Z. Y. Bian
H.D. Zhao
K.D. Peng
Z. Y. Wang
C. Li
Application of one-third scale Accelerated Pavement Testing (APT) to study the high temperature performance of China Qingchuan rock asphalt modified asphalt
491(6)
C. Zhuang
Y. Ye
Y. Wang
Research on ice interfacial and mechanical behavior of ski jumping inruns
497(6)
Y.Z. Sun
C. Y. Wu
C.Z. Sun
Implementation of engineering procurement construction contracting in civil aviation infrastructure pilot projects practice in China
503(5)
Z. Chonghua
Lightweight design for smart precast concrete pavement based on topology optimization method
508(7)
H. Y. Chen
H.D. Zhao
X. Y. Fu
Characterization of aggregate packing using digital image analysis
515(6)
V. T. Thushara
U. Chakkoth
J. Murali Krishnan
Study on intelligent monitoring system for long term performance of road engineering and new monitoring and sensing technology
521(4)
X. Xin
Y. Rong
Z. Qiu
M. Liang
L. Su
Z. Yao
Recycling of waste Glass Fiber Reinforced Polymer (GFRP) power as alternative filler for asphalt mastics
525(6)
J. Lin
B. Hong
T.S. Li
D. W. Wan
Z.P. Fan
S. Leischner
Quantifying the accuracy of roller segmented compactor in simulating field compaction
531(8)
P. D. Cheyyar Nageswaran
S. R. Miller
F. Bijleveld
N. Poeran
Eco-efficiency pavement materials
Tao Ma
Pengfei Liu
Study on performance of reclaimed rubber modified asphalt by lubricant by-products
539(4)
P. Kong
G. Xu
J. Yang
X. Chen
An overview of the heat exchanging asphalt layer prototype: A case study
543(5)
T. Ghalandari
L. Verheyden
N. Hasheminejad
R. Baetens
W. Van den Bergh
C. Vuye
Experimental study on basic properties of basalt fiber reinforced concrete
548(6)
L. Yu
X.J. Li
L.S. Bao
Z.X. Zhang
Z.B. Zhou
Research on strength and microstructure of fibre foamed concrete
554(7)
T. Qiu
C. Xing
Y. Tan
J. Xu
X. Liu
L. Wang
Y. Wang
C. Chen
L. Zhao
Influence of red mud filler on the fatigue behaviour of bituminous mastic
561(6)
M. Chaudhary
N. Saboo
A. Gupta
M. Miljkovic
A temperature-independent methodology for bitumen modification evaluation based on DSR measurement
567(7)
Q. Liu
H. Wang
J. Wu
M. Oeser
A preliminary approach for comparative life cycle assessment of flexible and rigid pavements - A case study
574(5)
B.S.S. Varun
J. Choudhary
A. Gupta
Reduction of accumulated plastic deformations in base courses
579(4)
L. Vollmert
The fatigue life extension prospect of calcium alginate capsules in porous asphalt
583(4)
S. Xu
X. Liu
A. Tabakovic
E. Schlangen
Influence of the characteristics of the aggregate on the fatigue performance of the epoxy asphalt mixture
587(4)
G. D. Zeng
H.M. Huang
M. Zhou
L. B. Wang
Investigation of fog seal with waterborne thermosetting materials in airport pavement
591(8)
L. Xu
F. Xiao
Microstructural and rheological analysis of crumb rubber modified bitumen
599(6)
J. B. Borinelli
J. Blom
G. Jacobs
D. Hernando
W. van den Bergh
C. Vuye
Effect of chemical stabilization of silty soil on strength and durability characteristics for construction of low volume roads
605(5)
S.K. Atahto
S. Sinha
S. Saurav
H. Chakravarty
Strain sensing behavior of epoxy composites with nano/micro hybrid of carbon materials for asphalt road in situ strain monitoring
610(7)
M. Liang
Z. Qiu
L. Su
Y. Rong
J. Song
G. Zhong
Mechanical characterization and safety technology for smart roads
Yue Xiao
Katerina Varveri
Damage mechanism in asphalt binder time sweep test from the perspective of failure appearance
617(5)
Z. Zhang
Q. Liu
P. Liu
M. Oeser
Wetting deformation characteristics of granite residual soils and the micro-mechanism
622(7)
Z. Y. Wang
J.M. Ling
Z. Y. Bian
L. Man
Evaluation of rutting performance of high modulus asphalt mixture based on the modulus Index
629(6)
H. Zhang
M. Zhang
G. Huang
Y. He
J. Zhang
Y. Guan
Modeling and characterizing the mesomechanical behavior of asphalt mixture with random aggregate distribution: A coupled topological-numerical method
635(6)
C. Du
P. Liu
M. Oeser
Research on morphological characteristics of coarse aggregates based on image processing
641(7)
R. Jiang
X. Zhou
M. Ran
Z. Zhao
Y. Yan
J. Guan
Non-linear modeling of the influence of rest period on healing behavior of asphalt concrete mixtures
648(7)
N. Roy
V. Chowdary
U. Saravanan
J. M. Krishnan
Monitoring-based maintenance decision-making models for subgrade settlement
655(7)
Z. Duan
C. Gui
Y. Hou
Analysis of compensatory driving behavior under fog weather conditions
662(7)
Y. Zhang
Z. Guo
B. Zhu
Z. Fan
H. Zhang
Three-dimensional flow simulation of open graded friction course's permeability
669(6)
S. Zhang
O. Elkhateeb
H. Feng
Development of a tire-pavement friction model incorporating the water effect
675(6)
J. W. Cai
H. Zhao
X. Qian
Z. Du
L. Zhao
Research on load effect based on bridge pavement repairing of the old bridge
681(8)
M.M. Xiao
S. B. Qian
C.H. Wang
Evaluating the driving safety of highway based on the differential water film analysis
689(6)
X. Gong
Y. Geng
Y. Ma
X. Chen
Measurement, modeling and validation of skid resistance of asphalt concrete pavement: Laboratory to field literature review
695(6)
A. Kumar
A. Gupta
K. Anupam
Water evaporation and curing reaction laws of waterborne epoxy emulsified asphalt mixture
701(8)
Y. Gu
X. Qiu
S. Xiao
B. Tang
L. He
F. Yang
Pavement monitoring and big data analysis*
Xingyi Zhu
Eyal Levenberg
A thermal digital twin for condition monitoring of asphalt roads
709(5)
L. Barisic
E. Levenberg
A. Skar
A. Boyd
P. Zoulis
Big data in roads and pavements: Insights from a bibliometric study and a critical review of recent publications
714(6)
S. Bhat
S.N. Suresha
Three-dimensions texture reconstruction of asphalt pavement based on MATLAB
720(5)
C. Qijing
P. Fang
Z. Meng
Three-dimensions textural fractal characterization and its correlation with the skid resistance of asphalt pavement
725(6)
X. Weifeng
L. An
Z. Meng
Damage fracture characterization of asphalt mixtures under freeze-thaw cycles based on acoustic emission monitoring
731(6)
L. Fu
W. An
X. Chen
Microscale morphology observation of bitumen: A comparison of atomic force and confocal laser scanning microscopy
737(5)
J. Blom
H. Soenen
Research on prediction model of asphalt pavement subsidence development based on back propagation neural network
742(7)
M.M. Xiao
S.B. Qian
A multi-objective optimization model on taxiing mode selection and aircraft stands allocation for closely spaced parallel runway
749(7)
J.M. Ling
Y.X. Fang
X. Li
G.K. Wang
Taxiing aircraft monitoring through pavement vibration sensing
756(7)
Z. Y. Bian
K.D. Peng
H.D. Zhao
M. Y. Zeng
Effectiveness rejuvenation in porous asphalt
763(7)
M. Moenielal
D. van Vliet
W.L.C. van Aalst
J. W.F. van der Kemp
P. The
A. Varveri
Classification of roughness for asphalt pavement resurfacing treatments based on SVM-KNN machine learning algorithm using LTPP data
770(6)
L. Wang
T. Zhang
Q. Dong
W. Jiang
Evolution rule of dynamic response of asphalt pavement under lateral movement test by MLS66
776(5)
C. Wu
Y. Huang
B. Zheng
R. Cao
X. Gu
H. Ren
Investigating vibration characteristics at concrete pavement joints using distributed optical fiber sensors
781(6)
Z. Y. Bian
M. Y. Zeng
H.D. Zhao
H. Chen
K. Cheng
Author index 787
Dr. Xueyan Liu is an associate professor in the Section of Pavement Engineering of the Faculty of Civil Engineering & Geosciences of TU Delft. He works in the areas of constitutive modelling, numerical modelling and material experimental characterization. Within the research program of the Section Pavement Engineering, his research topics mostly relate to the development and implementation of constitutive models for the simulation of the static and dynamic response of various pavement engineering materials like soils, asphalt concrete, liner and reinforcing systems etc. and sustainable development technologies, i.e., multiscale modelling of asphaltic materials, warm/cold asphalt concrete technology, durability of asphalt surfacing on orthotropic steel deck bridge, accelerated pavement test, pavement continuous monitoring and sustainable development technologies. Dr. Liu was granted his doctoral thesis in 2003. During the same period, Dr. Liu participated also in the team that developed the ACRe model for Asphalt Concrete Response currently implemented in 3D Computer Aided Pavement Analysis system (CAPA-3D). Dr. Liu has published more than 100 technical and journal papers on the mechanics and the finite element modelling of granular, concrete and asphaltic materials. Dr. Liu is a member of RILEM Technical Committee of Cracking in Asphalt Pavements WG3 and a member of Delft Centre for Materials (DCMat). He is also a member of ISAP, AAPT, APSE and IACMAG. Dr. Liu is an Editorial Board Member of Geomaterials (GM). Dr. Liu was appointed as Board member of the International Association of Chinese Infrastructure Professionals (IACIP) and member of the Academic Committee of the Key Laboratory of Road Structure and Materials Transportation Industry of the China Ministry of Transport. He is also actively involved in organizing inter/national workshops and conferences and was invited as Scientific/Technical committee member of several international conferences.



Dr. Kumar Anupam is an assistant professor in the Section of Pavement Engineering, Department of Civil Engineering and Geosciences, Delft University of Technology, the Netherlands. He is actively involved in teaching courses such as Micromechanical modelling of AC, Continuum Mechanics and Pavement Construction and Maintenance. His research activities are related but not limited to performance-based big-data analytics; tire-pavement interactions and micromechanical modeling of AC. He has been involved in several international projects which include FP7 EU projects and projects in the middle east. In national projects, he works in close cooperation with the Rijkswaterstraat, the Netherlands. He is a co-editor of Functional Pavement Design IV: Proceedings of the 4th Chinese - European Workshop on Functional pavement Design, CRC Press and Advances in Materials and Pavement Prediction: Papers from the International, CRC Press. He is an active member of the ISAP, TRB, APSE, iSMARTi and serves on the editorial board member of IJPE. Dr. Anupam holds a Bachelor's degree from Indian Institute of Technology-Roorkee, India and PhD degree from National University of Singapore, Singapore.























Professor Sandra Erkens holds the Chair of Pavement Engineering Practice, at Delft University of Technology in the Netherlands and is the head of the Pavement Engineering group at this University. Besides this, she is the principal specialist in pavement materials and structures at Rijkswaterstaat, the Dutch highway authority. Sandra obtained her PhD and MSc in Civil Engineering at the Delft University of technology. She is an internationally acknowledged expert in pavement materials and structures in general and asphalt concrete in particular. She is a member of national and international groups involved in developing technical requirements for pavement materials and in several (inter)national organizations for the dissemination of research. These include the ISAP technical committee on Constitutive Modelling of Asphalt Concrete, the organization committee of the two yearly Dutch conference on Infrastructure (CROW-infradagen) and the organizing committee of the 5th International Symposium on Frontiers of Road and Airport Engineering (IFRAE), of which she is one of the chairs. She has been involved in road engineering research since 1997, has published over a hundred papers and journal articles on her work and is a regular reviewer for conferences and journals on the topic. Prof. Erkens has considerable experience coordinating the cooperation of research organizations, among others as a member of the FEHRL (Forum for European Highway Research Laboratories) executive committee and as Program Team member for InfraQuest, the cooperation between Rijkswaterstaat, TU Delft and TNO building in the Netherlands. She is also one of the founding members and an officer of APSE, the Academy of Pavement Science and Engineering and their past secretary general.





























Professor Lijun Sun received his Ph.D. degree in 1989. Since 1993, he has been the professor in Department of Road and Traffic Engineering, and a CKSP professor in the College of Transportation Engineering at Tongji University since 1998, vice director of Academic Committee of Tongji university since 2021. He is the dean of Advanced Institute of Intelligent Transportation Studies, and director of Road and Traffic Institute. He received the National Outstanding Youth Research Found in 2003. He is the member of Expert Committee of China Ministry of Transportation, and the member of the council of China Highway Society, China Civil Engineering Society, and China Intelligent Transportation System Society. His research interests focus on the pavement structure, material, and pavement nondestructive evaluation, performance, preventative maintenance management and pavement recycling, as well as intelligent transportation management. He establishes the behavior mechanics for asphalt pavement, first pavement management system of China, and first intelligent traffic guidance system of China. His research results have been incorporated in the specifications of China Ministry of Transportation, China Ministry of Construction, and China Bureau of Civil Aviation for pavement design, evaluation and maintenance. He has published more than 600 technical papers, 13 books in his research fields, and won 3 National Prizes of Science and Technology Progress Awards and 35 provincial-level Science and Technology Progress Awards. He is chief writer of China Specifications of Airport Paving Design, and one of main writers of China Specifications of Asphalt Pavement Design.























Professor Jianming Ling is a professor in road and airport engineering and the dean of College of Transportation Engineering, Tongii University. He is the director of Key Laboratory of Infrastructure Durability and Operation Safety in Airfield of CAAC, and the director of Key Laboratory of Road and Traffic Engineering of the Ministry of Education, China. He is also an executive editor-in-chief of "Frontiers of Structural and Civil Engineering." and associate editor-in-chief of " International Journal of Transportation Science and Technology". Prof. Ling received his Ph.D. degree in civil engineering from Tongii University in 1993. His primary research interests are Subgrade Design Theories and Technologies, Airport Infrastructure Design and Management. In the past two decades, Prof. Ling led the research projects on dynamic behavior and design index of sub-grade for MEPDG in China. He also developed the first management system for airport pavement (CAPMS) in China, and a pavement design method for New General Large Air- crafts. Prof. Ling won the second prize of National Science and Technology Progress Award for four times. He was the chief editor of "Code for Design of Urban Road Subgrades", and "Technical Specifications of Airport Pavement Evaluation and Management" of China.