Innovative Materials and Technology for Sustainable Development of Society [Minkštas viršelis]

Preface, Committes and Organizers
Chapter 1: Ceramics, Semiconductors and Composites
BaSO4/Polyvinyl Alcohol Composites for Radiation Shielding
Characterization and Optical Properties of Zinc Oxide Films Prepared by
Microwave Technique
Design of Experiments for (100) Si Vertical Wall Wet Etching Using Sonicated
NaOH Solution
Dielectric Properties of Y2NiMnO6 Ceramics at Various Sintering Times and
Temperatures
Effect of Barium Titanate Additives on Dielectric Property of PLZT Ceramics
Effect of Blowing Agent on Cell Morphology and Acoustic Absorption of Natural
Rubber Foam
Effect of Electric Field and Temperature in Electrochemical Dissolution and
Deposition Process on Morphologies of ZnO Nanostructures
Effect of Sintering Parameter on Ferroelectric Properties in PZT Based
Ceramics
Effect of Temperature on the Structural and Magnetic Properties of
Co0.7Zn0.3Fe2O4 Ceramic Prepared from Solid State Reaction
Effect of Zr/Ti Ratio on Electrical Properties of Pb0.91La0.09(ZrxTi1-x)O3
Ceramics
Effects of Catalyst on Carbon Nanotubes Synthesized by Thermal Chemical Vapor
Deposition Method
Effects of Milling Technique on Physical and Mechanical Properties of
Lead-Free Ba(Zr0.3Ti0.7)O3 Ceramics
Electrical Properties of Y2NiMnO6 Ceramics Sintered at High Temperature
Influence of Multifunctional Monomers on Gamma Irradiated Polylactic Acid
Investigation on Structural and Electrical Property of (1-x) PLZT - x PZN
Ceramics
Local Structure and Phase Formation of Lead Zinc Niobate Powders by X-Ray
Absorption Spectroscopy
Magnetic Field Dependent Dielectric Properties in Ba(Ti0.99-xMn0.01Tax)O3
Ceramics
Optical Analysis of Bismuth-Based Glasses Doped Potassium Chromate
Preparation and Electrical Properties of Ba0.85Sr0.15Ti0.90Zr0.10O3 Ceramics
Doped Sn by Seed-Induced Method
Preparation of Poly(Vinylidene Fluoride)/Silica Composite Nanofiber by
Electrospinning Technique
Properties of Mg Doped ZnO Films Prepared by Ultrasonic Spray Pyrolysis
Scintillation Properties of Ce-Doped LuYAP Crystal for Gamma Ray Detection
Study Behavior of XPS Spectra of Ni, Mn, Y and O in Y2NiMnO6 Ceramics
Surface Investigation of Laser Glazed Mullite Thin Films on Yttria-Stabilized
Zirconia Coatings
The Dielectric Property of Y2NiMnO6 Ceramics Sintered at High Temperature
Chapter 2: Recent Building Materials
Effect of Nano-TiO2 on Mechanical and Thermal Properties of Cement Composites
for Thermal Energy Storage Materials
Microstructure and Dielectric Properties of 0-3 Cement/Rice Husk Ash-Lead
Niobate Zirconate Titanate Ceramic Composites
Physical and Mechanical Properties of Cement/Natural Rubber Latex/Rice Husk
Ash Composites
Physical Properties of Cement Mortar Containing Waste Ash
Preparation and Characterization of Cement-TiO2 Composites
Chapter 3: Biomaterials and Biomedical Engineering
Effect of Titanium Nitride on Properties of Hydroxyapatite-Based Composites
for Biomedical Applications
Effects of Calcium Carbonate Synthesized from Cockle Shell on Characteristics
of Calcium Phosphate Biphasic
Effects of the Sintering Temperature on Structural and Bioactivity in
BaFe12O19-P2O5-CaO-Na2O Bioactive Glass Ceramic
Fabrication of Polycaprolactone/Centella asiatica Extract Biopolymer
Nanofiber by Electrospinning
Optical Microarray Grating Biosensors
Photolithographic Process for Creating Micro-Grating on Silicon Substrate for
Biosensor Application
Predicting the UV Spectrum of Single Stranded DNA
Preparation of 2 wt% ZnFe2O4/HAp Ceramic for Future Biomedical Applications
Processing of Elastic Silk Sericin/Gelatin Composite Film for Future Cosmetic
Applications
Synthesis of Diamond-Like-Carbon Films as the Coating Prototype for
Biomedical Materials
A Study of the Preparation of Silk Sericin/Chitosan Composite Film for Future
Wound Dressing Applications
The Fabrication of Titanium Dioxide (TiO2) Thin Film via Deposited Spray
Pyrolysis Using for Antibacterial Applications
Characterization and Gel Properties of Gelatin Extracted from Waste Fish
Scales
Antimicrobial Effect of Squid Ink on Common Microbial Causing Biofilm
Attaching to Silicone
Antioxidant Activity in the Petal Extract of PAP1 Transgenic Tobacco
DNA Biosensor on Optical Nanograting Structure
Heat Effect on Antimicrobial Properties of Plasticizer PEG Blended Chitosan
Chapter 4: Materials and Technologies in Textile Industry
Colour Fastness Property of Printed Cotton Fabric Using Warp Yarn Printing
Technique
Needleless Electrospinning of Silk Fibroin/Gelatin Blend Nanofibres
UV-Protection Property of Silk Fabric Dyed with Natural Indigo by Using
Padding Technique: A Focus on Effect of Ferrous Sulfate Mordant
Chapter 5: Advanced Technologies in Agriculture, Environmental Engineering
and Waste Treatment and Recycling
Assessment of Heavy Metal Content in PM10 at Amphoe Mueang Pathum Thani
Province in Thailand
A Reliable Homemade Tissue Culture Protocol for Dendrobium Orchid
Cultivation
Environmental Survey on Physicochemical Parameters in Surface Water: A Case
of Klong Prem Prachakorn, Thailand
Heavy Rain and Drought Conditions in Thailand under Global Warming
Practical Homemade Copper Filter by Banana Peels, Sand and Charcoal for
Wastewater Treatment
Predictability of the Northeast Monsoon Forecasts by the Educational Global
Climate Model
Structure and Mechanical Properties of Water Buffalo Horns
Study of Moisture of Rice by Using Reflection Spectroscopy
Synergistic Effects of Cellulase-Producing Microorganisms for Future
Bioconversion of Lignocellulosic Biomass
The Effects of Cytokinins on Plant Regeneration of Vetiver Grass (Vetiveria
nemoralis A. Camus cv. Roiet)
The Removal Mechanisms of Organic Compounds in Household Wastewater by Soil
Sediment
The Study of Fluid Flows in Difference Hydroponics System Arrangements
Waste Management Education for Sustainable Islands
Odor Control in the Standard Thai Rubber 20 (STR 20) Industry by Using a Wet
Scrubber
Variations of the Precipitation Water Vapor by Using GPS Data Triggered
Raining in the Summer of Thailand
Heating Energy Briquettes from Cashew Nut Shell
Application of the Ensemble Kalman Filter to a One-Dimensional Linear
Advection Model
Fabrication of 2 wt% NiFe2O4/HAp Composite Ceramic for Future Heavy Metal
Removal Applications
The Difference of Si/Al Ratio on Organo-Zeolite in the Adsorption of Atrazine
and Linuron
Surface Modification of Composite Membranes by Coating PVA/TiO2 Layer
A Comparison of Statistical Methods for Forecasting the Price of Jasmine
Rice
Chapter 6: Engineering Decisions in Designing of Machines and Power
Novel Optical Trapping Micro-Sensor from PANDA Ring Resonator for Quantum
Computer Processing
Wigner Representation for Investigation of Entangled Photon Evolution in
Four-Wave Mixing Process within a Fiber Ring Resonator
Better Understanding Network of Electrical Terminal Stations by Topological
Analysis
NLARX Model Identification for Grid Tied Inverter Using Genetic Algorithm
The New Design of Fish Cake Making Machine
The Response of Optotune EL-10-30 Adaptive Lens at Various Frequency of
Supplied Electric Current
Improving the Evolutionary Computation for General Keyboard Arrangement
Problem
A Mathematical Model for Determination of Electric Energy Performance of
Small Solar Chimney System in Nakhon Ratchasima Province, Thailand
Chapter 7: Innovative Technologies Education for Sustainable Development of
Society
Application of Learning Management System for Online Learning Modules
The Construction and Evaluation of Instructional Package on Vector Quantity
The E-Learning on Analysis of the Experimental Results by Using Graphs