This book includes selected, high-quality papers presented at the International Conference on Intelligent Manufacturing and Energy Sustainability (ICIMES 2019) held at the Department of Mechanical Engineering, Malla Reddy College of Engineering & Technology (MRCET), Maisammaguda, Hyderabad, India, from 21 to 22 June 2019. It covers topics in the areas of automation, manufacturing technology and energy sustainability.
Performance Evaluation of Multi-Layer Barriers for Machine-Induced Low
Frequency Noise Attenuation.- Planing Process on AISI S-1006, S-7 and S-4340,
based on Johnson-Cook Model Using Numerical Technique.- An Analytical Study
of Diametral Error in Simultaneous Turning Process.- Improvement of Electric
Heater Design for Household Cooking Application in Developing
Countries.- Embodiment of an Efficient Brown's Gas Compound Fuel
Tank.- Automated Solar Photovoltaic Panel Cleaning/Cooling System using
Air-water Mixture and Sustainable Solutions to Off-grid
Electrification.- Design and fabrication of four way multi hacksaw cutting
machine.- Adhesion strength of Plasma Sprayed Coatings-A Review.- An
Experimental Studies on the Polymer Hybrid Composites- Effect of fibers on
Characterization.- Design Analysis and Pressure Loss Optimization of
Automobile Muffler.- Different Module for car parking system demonstrated
using Hough Transform for smartcity development.- Effect of Arrangement and
Number of Water Mist Spray Nozzles on Air Humidity.- Vibration Condition
Monitoring of Spur Gear Using Feature Extraction of EMD and Hilbert Huang
Transform.- Comparative Study of PWM Technique for Switching Loss Reduction
and Acoustic Noise Reduction in VSI fed Drives.- An Improved Genetic
Algorithm for Production Planning and Scheduling Optimization
Problem.- Automatic Calibration for Residential Water Meters by Using
Artificial Vision.- "Hardware in The Loop" of a flow plant embedded in FPGA,
for process control.- Error Diagnosis in Space Navigation Integration using
Wavelet Multi Resolution Analysis with General Regression Neural
Network.- Hydromagnetic squeeze film performance of two conducting
longitudinally rough elliptical plates.- Performance and Emission
Characteristics of Biodiesel from Rapeseed & Soybean in CI Engine.- A
Practical approach to Camera Calibration for Part Alignmentfor Hybrid
Additive Manufacturing using Computer Vision.- Development of a colour and
orientation detection system for small part feeding.- Comparative analysis on
battery used in Solar Refrigerated E-rickshaw in India.- Application of
Value Stream Mapping (VSM) in a Sewing Line for Improving Overall Equipment
Effectiveness (OEE): A Case Study.- CFD analysis to increase heat transfer
in pipe with combined effect of circular perforated ring and twisted tape
insert.- Study On Solar Parabolic Trough Collector With Different Copper
Absorber Tubes.- Harmonic Analysis for Bidirectional Grid Connected Converter
for Electrical Vehicle during Charging and Discharging Operations.- Effect of
tribolayer on the sliding wear behavior of detonation sprayed Alumina-Titania
coatings.- Development of Sustainable Cementitious Binder Utilizing
Silicomanganese Fumes.- Review on Sliding wear of Ti6Al4V alloy concerning
counterface and sliding conditions.- Hardness and Microstructure studies on
the effect of Solution treated-age hardened Al-6082 Alloy.- Floating Photo
Voltaic Thin Film Technology - A Review.- Effect of Ethanol fumigation on
performance and combustion characteristics of Compression Ignition Engine
fuelled with Used Cooking Oil Methyl Ester in dual fuel mode.- Estimation and
Moderation of Harmonics in Distribution Systems.- Theoretical Evaluation of
Energy Performance of a Vapour Compression Refrigeration System Using
Sustainable Refrigerants.- Effect of Autofrettage on the properties of the
Aluminum Cylinders.- Influence of Graphene and Tungsten Carbide Reinforcement
on Tensile and Flexural strength of Glass Fiber Epoxy
Composites.- Investigation of partial discharge due to copper spherical
particle in power transformer under various oil flow models using CFD.- A
high power high frequency isolated DC-power supply for electrical vehicle
charging application.- Effect of Slicingthickness and Increment on the design
of patient specific implant for Total Knee Replacement (TKR) using Magnetic
Resonance Imaging (MRI) - A case study.- Microstructure and Hardness Behavior
Sudy of Carbon Nanotube in Aluminium Nanocomposites.- Comparison of Electric
field with and without corona ring for 66kV line insulator.- Experimental and
FEA Simulation of Thermal-Fluid Interaction Between TIN Coated Tungsten
Carbide Tool and Inconel-825 Workpiece.- The Effect of Recrystallization on
Electrical Resistivity of Stir Casted SiCP/AA6061 Composite after Shot
Peening.- Static Stress Analysis of WYE-Piece for penstock
application.- Comparative Investigation on Gas Tungsten Arc Welding and
Friction Stir Welding of Electrolytic Tough Pitch Copper Plates.- Synthesis
and Characterisation of Functionally Graded Ceramic Material for Aerospace
Applications.- CI Engine Characteristic Investigation by Application of Metal
Based Additives with Biodiesel Blends.- Simulation of underground cable
faults (defects) with the detection of partial discharge.- Comparison of CI
Engine performance parameters and Emissions by varying designs of Intake
Manifolds.- Variation of Time Lag, Decrement Factor and Inside Surface
Temperature with Solar Optical Properties of Building Envelope in Different
Climatic Zones of India.- Study On Tensile and Hardness Properties of Al7075
Alloy Reinforced With Graphite, Mica and E-Glass.- ANN based fault
classification and section identification technique using superimposed
currents for three-terminal transmission line.- An analytical investigation
for combined pressure driven and electroosmotic flow without the DebyeHuckel
approximation.- Addressing the Green tribology advancement, future
development and challenges.- Effect of Drying Temperature to the Drying
Characteristic, Morphology and Peak Viscosity of Traditionally Processed Sago
Starch (Lemantak).- Evaluating Mechanical Properties of Egg Shell and Coco
Peat Reinforced Epoxy Composite.- Design Modification of Rear Axle Housing by
Fatigue Failure Analysis.- Mixture Design using Low Cost Adsorbent Materials
for Decolourisation of Biomethanated Distillery Spent Wash in Continuous
Packed Bed Column.- Prediction of the WPPO Biodiesel Fuelled HCCI Engine
Using Artificial Neural Networks.- Dimensional Analysis of Form Drilling
parameters by Buckingham pi theorem and optimization of heat generation in
Form drilling process by Taguchi.- Comparison of ductile, flexural, impact
and hardness attributes of sisal fiber reinforced polyester
composites.- Optimization of EDM Process Parameters using Standard Deviation
and Multi-Objective Optimization on the basis of Simple Ratio Analysis
(MOOSRA).- Modeling and Simulation of Trans Z-source Inverter with Maximum
Constant Boost PWM Control for Solar PV System.- Driver Drowsiness Monitoring
System.- Detection and Controlof Water Leakage in Pipelines and Taps Using
Arduino Nano Microcontroller.- Smart Automated Processes for Bottle-filling
Industry using PLC-SCADA System.- Effect of Stirring Speed During Casting on
Mechanical Properties of Al-Si Based MMCs.- Exploration of Pillars of
Industry 4.0 using Latent Semantic Analysis Technique.- An Overview of
Different Topologies of DC-DC Bidirectional Converter for Different
Applications.- An Approach to detect and classify defects in Cantilever Beams
using Dynamic Mode Decomposition and Machine Learning.- Musculoskeletal
Simulation and Analysis of Upper Limb Rehabilitation Device.- Fuzzy
Regenerative Braking Strategy.- A New Framework for Secure utsourcing of
Medical Data.- A Comprehensive View for Providing the Decision on Medicare
data.- Predicting Cardiac-Arrhythmia Using QRS Detection and Multi-Layer
Perceptron.- Full Length Driver Drowsiness Detection Model Utilising Driver
Specific Judging Parameters.- Enterprise Reporting Solution on Integrating
Business Intelligence for Operational and Financial Data.- Accelerating The
Classifier Training Using Various Boosting Schemes Within Cascades Of Boosted
Ensembles (Cobes).- Service Layer Security Architecture For Iot Using
Biometric Authentication And Cryptography Technique.
Dr. A. N. R. Reddy is a Professor & HOD of Department of Mechanical Engineering at MRCET. He is currently working in the cross domains of research that include Design of experiments, Mathematical Modeling, Bioenergy production & analysis, Pyrolysis of Biomass, Synthesis of Nanomaterials, Combustion, Engine Performance & Exhaust gas analytics, Applied & Fluid mechanics. Dr. Reddy is actively engaged in industry collaborated research focusing on industry 4.0. He has published over 30 peer-reviewed publications and serves as a panel reviewer for 13 International Journals. Also, Dr. Reddy is a life member of professional associations such as ORSI, ISTAM, IndACM, ISTE, EWB and Member of SAE India, ISSMO. He completed his B.Tech and M. Tech from JNTU, Hyderabad, India and Ph.D. from Universiti Malaysia Sarawak, Malaysia. For his contributions, Dr. Reddy has received 4 innovation awards as well as 2 prestigious research excellence awards such as the Malaysian GovernmentInternational Student Award Malaysian International Scholarship from the Ministry of Higher Education, Malaysia; Zamalah Graduate Scholarship from UNIMAS.
Dr. Deepak Marla is currently working as an Assistant Professor in the Department of Mechanical Engineering at the Indian Institute of Technology Bombay (IIT Bombay). He is working in the domain of micro/nano-manufacturing using advanced techniques that involve lasers, electric discharges, electrochemical reactions, plasmas, and micro-tools. His research focuses on gaining fundamental insight into these processes through synergetic use of multi-physics modeling and simulation, and experiments with an eye on addressing critical challenges at the process level.
Dr. Milan Simic is a Senior Lecturer at RMIT University, School of Engineering, Melbourne, Australia and Visiting Professor at The University Nikola Tesla, Belgrade, Serbia. He is also an Associate Director for the Australia-India Research Centre for Automation Software Engineering (AIRCAUSE). AICAUSE is a joint initiative of RMIT University, State Government of Victoria and ABB Group (India and Australia). He completed his B.E., M.E. and Ph.D. from RMIT University Melbourne, Australia. He has published over 125 peer-reviewed publications, with 493 citations in the last 5 years. He has developed fast 3D metal printing technology, won an international award in Germany. For his contributions, Dr Simic has also received other prestigious awards and recognitions: Two for the research and development from Honeywell and two RMIT University awards for excellence in teaching and the provision of education to the community. As a KES Journal General Editor, Dr Simic is processing around 400 papers per year, with the support of more than 70 Associate Editors and 600 reviewers. KES is a worldwide association involving about 5000 professionals, engineers, academics, students and managers.
Dr. Margarita N. Favorskaya is a Professor and Head of Department of Informatics and Computer Techniques at Siberian State Aerospace University, Russian Federation. Professor Favorskaya is a member of KES organization since 2010, the IPC member and the Chair of invited sessions of international conferences. She serves as a reviewer in international journals (Neurocomputing, Knowledge Engineering and Soft Data Paradigms, Pattern Recognition Letters, Engineering Applications of Artificial Intelligence), an associate editor of Intelligent Decision Technologies Journal and Computer and Information Science Journal. She is the author or the co-author of 160 publications and 20 educational manuals in computer science. She co-edited 5 books for Springer recently. She has supervised 8 PhD candidates and presently supervising 5 PhD students. Her main research interests are a digital image and video processing, remote sensing, pattern recognition, fractal image processing, artificial intelligence, information technologies and the applications of artificial intelligence techniques in many disciplines including mechanical engineering, electrical engineering, healthcare and so on.
Prof. Suresh Chandra Satapathy is currently working as Professor, School of Computer Engg, KIIT Deemed to be University, Bhubaneswar, Odisha, India. He obtained his Ph.D. in Computer Science Engineering from JNTUH, Hyderabad and Master degree in Computer Science and Engineering from National Institute of Technology (NIT), Rourkela, Odisha. He has more than 28 years of teaching and research experience. His research interest includes machine learning, data mining, swarm intelligence studies and their applications to engineering. He has more than 98 publications to his credit in various reputed international journals and conference proceedings. He has edited many volumes from Springer AISC, LNEE, SIST, and LNCS in the past and he is also the editorial board member in few international journals. He is a senior member of IEEE and Life Member of Computer Society of India.
