Materials and Technologies for Protection and Constructions [Minkštas viršelis]

Preface
Chapter 1: Structural Metals and Processing Technologies
Effect of Silica Content on the Surface Quality of Cast Iron in Shell Mould
Process
Temperature of Aluminum Alloy Strip During Casting Using a Vertical Type High
Speed Twin Roll Caster
Thin Wire Casting Using Twin Wheel Caster Equipped with Horizontal Wheels
Numerical Simulation of CNC Incremental Forming of Straight Wall Parts Based
on Model Partition and Non-Steep Surface
Influence of Different Zoning on Part Thickness in the Multi-Stage
Incremental Forming Based on the Extrusion from the Forward and Reverse Side
of the Sheet
Effect of Orbital Welding Parameters on the Weld Geometry
Chapter 2: Corrosion Properties of Steel Materials
The Degradation of the most Common Stainless Steels: Real Case Issues
Study on Corrosion Behavior of Simulated Welding Microstructure of Austenitic
Stainless Steel
Study on Corrosion Tendency Evaluation of Microstructure in Welding Heat
Affected Zone of Austenitic Stainless Steel
Study on Grain Boundary Sensitization in Heat Affected Zone of Austenitic
Stainless Steel and its Evaluation Method
Chapter 3: Properties and Technologies for Polymers and Composites
Processing
Identification of Material Viscoelastic Properties using the Motion of a
Rigid Sphere Located at Tissue-Mimicking Material Interface in Response to a
Dynamic Force
Effects of Metal Matrix Composition on the Pre-Sintering Process of Cu-Based
Metallic Friction Materials
Application of Magnetic Abrasive Finishing Process Using Alternating Magnetic
Field for Finishing Polychlorotrifluoroethylene Resin
Chapter 4: Additive Manufacturing
Copper Tannate (CuTn) Based Coating on 3D Printed Face Masks
Printability and Warpage Evaluation of Polypropylene/Nano Precipitated
Calcium Carbonate Composite Prepared by Extrusion-Based 3D Printing
Improvement of Isotropic Strength of 3D Printing-Based Self-Healing Capsules
by Controlling the Position of Holes
Chapter 5: Wastewater Treatment
Photocatalytic Degradation of Allura Red (AR) with TiO2 Immobilized on
Solution Blow Spinning (SBS) - Spun TIPP/PVP Membranes
Preparation and Characterization of Modified Clay - Application to the
Adsorption of an Industrial Dye
Chapter 6: Density Functional Theory Method for Calculations in Materials
Research
Interaction of C60 with Small Molecules: Adsorption - Inclusion Energy
Calculation Using the Density Functional Theory
Strain Effects on the Band Structures of Monolayer GaN from the Density
Functional Theory
Unveiling Electronic Structure and Spin-Resolve of Bulk Bi2O2X (X = S, Se,
and Te) Materials: A Computational Study Based-On Density Functional Theory
Chapter 7: Materials in Construction
Numerical Simulation of Direct Tensile Test of Reinforced Concrete Using
Abaqus Software
Influence of Temperature and Humidity of the Environment where the Concrete
Hardening Takes over on the Efficiency of Surface Microdosis Application
Specific Aspects of the Study of the Surface Properties of Plywood
Design and Research of Bituminous Compositions Modified by Rubber Brittle
Waste
Chapter 8: Fire-Resistance of Building Materials
Experimental Investigations of the Thermal Decomposition of Wood at the Time
of the Fire in the Premises of Domestic Buildings
Fire Protection of Steel with Thermal Insulation Granular Plate Material on
Geocement-Based
Results of Experimental Investigations of Reinforced Concrete Wall Elements
According to the Standard Temperature Mode of Fire
The Improvement of the Method to Determine the Temperature in Steel
Reinforced Concrete Slabs in Assessment of their Fire Resistance
Research of Fire Resistance of Fire Protected Reinforced Concrete Structures