These Proceedings represent the metallurgical engineering and materials science research presented at the 63rd Annual Conference of Metallurgists (COM 2024), held in Halifax, Nova Scotia, Canada, from August 19 to 22, 2024.. The Annual Conference of Metallurgists is organized by the Metallurgy and Materials Society of the Canadian Institute of Mining, Metallurgy and Petroleum (MetSoc of CIM). The collection themed Clean Technologies for a Materials-Intensive Future presents findings on a wide range of topics, including:
- Advanced Manufacturing and Materials VII
- Arsenic/Minor Element Controls in Metallurgical Plants
- Corrosion and Environmental Degradation of Materials
- Electrometallurgy for a Net Zero Economy
- Extractive Metallurgy from Conception to Operation: Experimentation , Simulation, Pilot and Ramp-up
- 25th International Biohydrometallurgy Symposium (IBS 2024)
- Joe Ferron Memorial Symposium Processing of Critical Materials
- Light Metals for Transportation: Marine, Aviation, and Ground Applications
- WALSIM X: Water, Air, Land Sustainability Issues in Mining and Metal Extraction
Advanced Manufacturing and Materials VII.- COM24046: Hydro Quebec
Efforts toward an Integrated Computational Materials Engineering Framework
for Hydraulic Turbine Engineering.- COM24076: The Reciprocating Wear Response
of Additively Manufactured, Al2O3-based Ceramics Produced Using Digital Light
Processing.- COM24091: Compressive Deformation of 3D-Printed CrMnFeCoNi
Alloy.- COM24094: Physico-Chemical Properties of Ni-P Hexagonal Boron Nitride
Composite Coatings.- COM24104: Polymer-Derived Ceramic 3D Printing:
Formulation, Pyrolysis, and Structural Insights.- COM24119: Effect of TiC
Addition on Microstructure and Mechanical Properties of CX Stainless Steel
Produced via Laser Powder Bed Fusion.- COM24120: Fatigue Strength Improvement
of an Aluminium Powder Metallurgy Alloy Using Ultrasonic Pulsed Waterjet
Peening.- COM24123: Experimental Investigation of an Ultrasonic Atomization
Process for Metal Powder Production.- COM24132: Phase and Mechanical Property
Prediction in Multi-Principal Element Alloys Using Machine Learning.-
COM24135: Control of Intermetallic Compounds in NiTi / Stainless Steel
Joints.- COM24137: Development of High Entropy Alloy-Based Anti-Biofouling
Coatings via Cold Spray Technology for Enhanced Marine Structure
Sustainability.- COM24142: Comparative Study between Composite and
Multilayered Electroless Ni-Co-P-PTFE Coatings on Mild Carbon Steel.-
COM24143: Directed Energy Deposition of UNS C63020 Nickel Aluminum Bronze
Powder.- COM24149: Development of Formable Steel Grades through Alternative
Steelmaking Technologies.- COM24167: Additive Manufacturing of a
Semi-Austenitic Precipitation-Hardening Stainless Steel.- COM24179: The Use
of Laser Powder Bed Fusion in the Manufacturing of Tooling for High Pressure
Die Casting Applications.- COM24186: Developing Novel High-Strength Beta
Titanium Alloys with In-Vitro Biocompatibility through Laser Powder Bed
Fusion.- COM24194: Additive Manufacturing and the Design of Multifunctional
Heterogeneous/Aperiodic Architected Metamaterials: A Mechanical Perspective.-
COM24198: Integrating Nanotechnology with Additive Manufacturing: Development
of Eco-Friendly Carbon Nanotube-Reinforced Polymeric Bio-Nanocomposites for
Material Extrusion 3D Printing.- COM24199: Development of Sustainable Biomass
Filled Polymeric Composites for Sustainable 3D Printing.- COM24209: Effect of
Ti Addition on the Microstructure Evolution and Mechanical Properties of
Austenitic High-Mn Steels.- COM24220: Metso pCAM Plant Solution.- COM24229:
Effect of Manufacturing Strategy on Microstructure of a Low Carbon Steel
Alloy Fabricated with Wire-Arc Additive Manufacturing.- COM24232: The Role of
Topological Defects in the Mechanics of Additively Manufactured 2D
Architected Honeycomb Metamaterials.- COM24266: Advances in Materials
Selection, Processing, and Welding Techniques for Marine Steels in Polar
Icebreakers A Review.- COM24332: Addressing the Anisotropy Issue and
Corrosion Engineering in Laser Material Deposition of Inconel 718 through
Scanning Speed.- COM24337: Decarbonization of Steel: The EAF Transition and
Knowledge Transfer.- COM24338: Tailoring Microstructure and Mechanical
Properties of an Arc Directed Energy Deposited Nickel Aluminum Bronze Alloy
via Post-Printing Heat Treatment.- COM24360: Sustainable Feedstock
Development: Biomass and Recycled Polyethylene Terephthalate in Circular 3D
Printing Materials.- COM24368: Control of Microstructure and Properties in
Additive Manufacture of Nickel Aluminium Bronze.- COM24415: Intellectual
Property Challenges for Advanced Manufacturing in the Automotive
Industry.- Arsenic/Minor Element Controls in Metallurgical Plants.- COM24042:
Impurities in Copper Flash Smelters Modelling, Field Experience and
Laboratory-Scale Experiments.- COM24048: The New Tin Recovery Business in the
Mitsubishi Materials Group.- COM24051: Operating Windows for the Use of Soda
and Calcium Carbonate for Arsenic and Antimony Control in Anode Copper.-
COM24070: Lanthanide Arsenate Chemical Thermodynamics.- COM24083: Removal and
Direct Stabilization of As(III) in Wastewater by the Formation of Tooeleite.-
COM24115: Antimony Treatment in Kosaka Lead Smelting.- COM24117: Tin
Treatment in Kosaka Lead Smelting.- COM24157: Gas-Liquid Enhanced Sulfidation
Separation of Cu and As in Smelting Acid Wastewater.- COM24176: The AgDDC
Method for Arsine Gas Analysis in Electrometallurgical Experiments.-
COM24188: Aeris - Copper Ladle Metallurgy at the Horne Smelter: A Sustainable
Modernisation.- COM24276: Overview of Arsenic Stabilization at Base Metal
Smelters Using Arsenic Trisulphide.- COM24282: Electrochemical Aspect of
Scorodite Synthesis Process for Arsenic Fixation.- COM24286: Scorodite 3.0:
Production of Gypsum-Free Scorodite by Iron Dissolution.- COM24289: Forever
Homes for the Big Bad Four: Arsenic, Thallium, Mercury, and Cadmium.-
COM24300: Coprocessing of Calcium Arsenic Residues and Waste Sulfuric Acid:
Arsenic Immobilization and Valuable Metals Recovery.- COM24313: Simultaneous
Removal of Arsenic and Sulfate from Mining Wastewater by Ettringite
Precipitation.- COM24315: Effective Reduction of Selenate Species down to.-
COM24317: Arsenic Control in Copper Smelter through Bleeding and
Immobilization Treatment of Arsenic-Containing Waste Acid.- COM24324: The
EcoMetales Contribution to the Stabilization of Arsenic Contained in Mining
Residues.- COM24326: A Leaching Kinetic Model for Arsenic Reduction from
Chilean Copper Concentrates.- COM24328: Improvements in the Atmospheric
Scorodite Process.- COM24329: Selective Leaching of Deleterious Elements by
Alkaline Sulfide Leaching from Copper Sulfide Concentrates.- COM24344:
Processing of Arsenic Containing Manitoba Nickel Concentrate at Vales Long
Harbour Processing Plant: Case Study Tracking Arsenic Deportment and
Stability.- COM24374: Initiatives to Treat Impurity Elements in Copper
Smelting and Refining Process toward Green Hybrid Smelting in JX Metals
Corporation.- COM24381: The Link between Slag Chemistry and Arsenic Flows in
Primary Copper Smelting.- COM24420: Partial Roasting Combined with Scorodite
Technology for Efficient Arsenic Removal and Stabilization from
Cu-Concentrates.- COM24421: Prevention of Anode Passivation in Copper
Electrorefining.- COM24436: Critical Mineral Production from By-Products of
Copper Processing.- Corrosion and Environmental Degradation of Materials.-
COM24010: Assessing Refractory Degradation and Damage by
Acousto-Ultrasonic-Echo.- COM24026: Comparison of Factors Promoting
Hydrogen-Related Intergranular Fracture in Elastic and Plastic Regions of
Tempered Martensitic Steel Utilizing Frozen-in Hydrogen Distribution at -196
°C.- COM24037: The Effect of Hydrogen on the Tensile Properties of Cold
Finished Mild Steel.- COM24038: Assessment of Hydrogen Diffusion on Fatigue
Behaviour of Steel Gas Pipelines.- COM24043: Effect of Arsenic on Corrosion
in a Smelter.- COM24044: Effects of Hydrogen-Charging on the Mechanical
Properties of Pipeline Steels.- COM24045: A Unified Machine-Learning Force
Field for Sodium and Chlorine in Both Neutral and Ionic States.- COM24059:
Oxidation Behavior of Different High-Entropy Alloys Under Static and Cyclic
High-Temperature Conditions.- COM24060: The Efect of Surface Preparation on
the Corrosion Behaviour of Copper Coatings.- COM24067: Dislocation Movement
Associated with Solid-Solute Hydrogen in High Strength Martensitic Steel.-
COM24079: Characterization of the Oxide Formed on a Zr-2.5Nb Alloy: A TEM and
Micropillar Compression Study.- COM24080: Influence of Microstructures in
Pipeline Steels on Corrosion in Simulated Supercritical CO2-Saturated Aqueous
Phase.- COM24085: Accelerating Marine Coatings Evaluation: Assessing Barrier
Performance of Marine Primers Using AC-DC-AC Electrochemical Testing.-
COM24090: Understanding Pb-Alkaline Stress Corrosion Cracking (SCC) in Ni-
and Fe-Based Alloys.- COM24100: Collaborative Exploration of Advanced
Lubricants at an Operating Wind Farm: Operational Insights and
Considerations.- COM24105: Effect of Zn Content on Corrosion of As-Cast
Al-Fe-Zn-Mg Dilute Eutectic Alloy for Automotive Applications.- COM24110:
Electrochemical Properties of Zn-Based Coatings on Direct Press Hardened
Steels.- COM24111: Effects of Cover Gases on the Oxidation of Magnesium
Alloys.- COM24124: Effect of Hydrogen Absorbent Material in Conductive
Coating ICCP System.- COM24125: An Investigation of Thermally Sprayed
Aluminum (TSA) Coating Failure Mechanism under Corrosion under Insulation
(CUI) and Submerged Conditions.- COM24127: Effect of Temperature on Corrosion
Properties of Stressed API X52 Pipeline Steel in a Saturated CO2 Saline
Environment.- COM24131: Influence of Trace Gas Contaminants on High
Temperature Oxidation of IN718 Superalloy Assessed via GCMS Coupled Thermal
Gravimetry.- COM24134: The Importance of Surface Preparation in Leading Edge
Protection Durability.- COM24138: How Proactive Concrete Design Created Wins
at a Canadian Gold Mine by Positively Impacting Asset Service Life, Costs,
and Carbon Footprint.- COM24139: Structural Asset Corrosion in Mining
Exposures: Exploring Risk Trends and the Importance of Good Data.- COM24148:
Designing Cost-Effective Stainless Steel Reinforcing Bar: The Role of Costly
(Molybdenum and Nickel) Alloying Elements.- COM24152: FBE Coatings under
Hydrothermal Conditions: A Long-Term Study.- COM24160: A Time and Element
Resolved Dissolution Study of Zinc via Atomic Emission Spectro
electrochemistry (AESEC).- COM24187: Dry and Wet Air Oxidation Study of Next
Generation Chromia-Forming Heat-Resistant Alloy.- COM24236: Erosion Behavior
of Coarse Grained Alumina in Corrosive Melts: Experimental and Computational
Studies with CAS and CASM Slags.- COM24239: Comparing the Dealloying
Behaviour of Monel 400 and Alloy 800 in Acetate Solutions.- COM24241: Cl-Ion
and Temperature Affect X65 Steel Corrosion in Supercritical CO2-Saturated
Aqueous Solutions.
The Metallurgy and Materials Society: Metallurgists have been active in the Canadian Institute of Mining, Metallurgy and Petroleum (CIM) since its inception in 1898. In 1945, the Metallurgy Division was formed to reflect the groups technical interests. Constituted as a society in 1967, MetSoc has grown to become one of the premier global organizations serving the international metallurgy and materials community. Its annual Conference of Metallurgists (COM) is a preeminent event on the international metallurgy meeting calendar. In partnership with sister societies, MetSoc is also a lead organizer of key world-class conference series such as Nickel-Cobalt, Copper and Lead-Zinc.
Daugiau apie elektronines knygas